Skip to content

Home/Alternatives/Software & platforms

The alternative to Kpler for Software and Platforms

Evaluation of maritime data providers usually begins with the best known name and continues until the alternatives are understood. An integration is expensive to reverse. This page sets out what we are, how the data is produced, and the questions worth putting to any AIS data provider before contract.

100,000+

Vessels tracked / day

49M+

AIS positions / day

40+

Countries covered

<5s

Antenna to your API

Who we are, in the terms an engineering team actually cares about.

We own and operate our own network. Nothing in the feed is purchased from or blended with a third party network.

  • We operate the receivers ourselvesWorldwide AIS Network ApS is a Danish company based in Copenhagen, CVR 45911748, backed by Den Danske Maritime Fond, approved under the Startup Denmark scheme, and building with peaq. The terrestrial and ship-borne receivers are our own, with satellite feeds for open ocean.

  • Manipulated signals arrive as filterable dataEvery station runs the same dedicated standardised hardware, encrypting each message at the instant of capture. Every position carries a nanosecond timestamp, the station that collected it, and a trust score from anomaly detection models. The network returns 100,000+ vessels and 49M+ AIS positions a day across 40+ countries.

  • The feed runs in parallel with your existing sourceDelivery is raw NMEA over TCP, a REST API, a WebSocket stream, and SAPIENT compliant output to the BSI Flex 335 interface, reaching your API in under 5 seconds from antenna. Replacement is not a precondition. Run the feed alongside whatever you are evaluating and compare on vessels you already track.

Compare providers on the water you actually coverSend the bounding boxes your product covers and the throughput you expect, and we will set out what the network returns for exactly that water.

Test the feed in your stack

What to look for in an AIS data provider for software platforms and data teams.

These questions are worth putting to every provider on your shortlist, ourselves included. They determine whether an integration holds up in production, and a headline vessel count answers none of them.

  • Provenance: who collected the position

    Establish whether the provider operates the receivers or sources the data from third parties. Both are legitimate models and both ship real products, but they behave differently under load, and only one permits a supplier to remedy a coverage gap directly. Obtain in writing which parts of the feed are first party. It determines what a second source is worth.

  • Latency: where the clock starts and stops

    A quoted latency figure means nothing without both endpoints. Antenna to API, ingest to database, and database to query are three different numbers. Establish which one is quoted, whether it is a median or a worst case, and how it holds in congested water rather than in aggregate. Ours is under 5 seconds from antenna to your API.

  • Delivery: the formats your pipeline can absorb

    Decoded JSON is convenient until a field the decoder discarded turns out to matter. Raw NMEA is complete, but the parsing is yours. Push and poll fail differently. Establish what a WebSocket stream does on reconnect, whether the gap can be backfilled, and what rate limits apply to the historical endpoints as well as the live ones. We deliver raw NMEA over TCP, REST, WebSocket, and SAPIENT compliant output to BSI Flex 335.

  • Coverage: in your waters, not on a global map

    Global figures say little about a specific strait, anchorage or inland waterway. Give every provider your bounding boxes and ask what they return within them, including update frequency per vessel and how terrestrial and satellite reception combine in that box. A precise answer is easier to plan around than an impressive one.

  • Independence: whether two sources are really two

    A second feed bought for resilience is only resilient if it shares no upstream infrastructure, corporate ownership or exchange membership with the first. Consolidation in this market leaves teams holding two contracts and one point of failure. Trace the hardware, not the invoice. Our network is our own physical infrastructure, which is what makes running it in parallel meaningful.

  • Spoofing: what the provider does about it

    AIS carries no authentication, so any transmitter following the protocol can broadcast any MMSI, course and speed. Establish whether manipulation is addressed at the message level or in a separate report, whether the quality metadata arrives alongside the position or only a cleaned output, and what the detection rests on. We attach a trust score to every position.

How we produce the data,
from antenna to your endpoint.

Relevant if you are conducting supplier due diligence. This is the entire chain, and no third party feed enters it.

Monitor

Collected on infrastructure we own

Terrestrial and ship-borne receivers, plus satellite feeds for open ocean we operate ourselves, every station on the same dedicated standardised hardware, encrypting each message the instant it is captured. 100,000+ vessels and 49M+ positions a day across 40+ countries.

Verify

Scored before your service sees it

Nanosecond timestamps, the collecting station, and a trust score from anomaly detection models. Your pipeline can filter, flag or route on that score rather than trust every message equally.

Act

Into the stack you already have

Raw NMEA over TCP, REST, WebSocket, or SAPIENT compliant output to BSI Flex 335. Under 5 seconds from antenna to your API, so it fits behind an existing abstraction rather than forcing a rewrite around it.

How Worldwide AIS Network compares.

Questions worth putting to every provider on your shortlist, ourselves included.

What to checkWhat to ask any providerWorldwide AIS Network
Where the data comes fromDo you operate the receivers yourselves, or buy and blend feeds from others?Our own independent physical infrastructure. Terrestrial and ship-borne, plus satellite feeds.
Provenance on each positionCan you tell me which receiver collected this specific position, and when?Every position carries its originating receiver and a nanosecond time stamp.
Handling of spoofingHow do you detect a manipulated or spoofed position before it reaches me?Anomaly detection models assess the validity of every position in real time.
LatencyWhat is the delay from reception to the data being available in my system?Under five seconds, antenna to API.
Delivery formatsWhich formats do you deliver, and will they drop into what I already run?Raw NMEA over TCP, REST API, WebSocket stream, and SAPIENT compliant output to BSI Flex 335.
Coverage where it matters to youCan you show me real data for my specific waters before I commit?100,000+ vessels a day across 40+ countries. Ask for a sample of your own area.
Running alongside what you haveCan I add you next to my current provider rather than replacing it?Yes. Running side by side is the intended pattern, not a compromise.

We have deliberately not filled in a column for any other provider. Coverage, latency and sourcing change, and a claim we cannot evidence is worth nothing to you. Put these questions to everyone you are evaluating and compare the answers yourself.

Questions from teams mid-evaluation.

Can we run Worldwide AIS alongside our existing provider?

Yes. That is the pattern we design for. Most teams that adopt us retain their existing provider and add an independent second source behind the same internal interface. It gives a live comparison on vessels already known, a fallback that shares infrastructure with no other network, and a proper evaluation without committing a release to the outcome. Neither our contract nor our delivery assumes exclusivity.

How much engineering work is it to add or switch an AIS feed?

The cost depends on how your code stores positions, not on whose API you call. Where vessel positions already sit behind an internal interface, adding a source is an adapter and a configuration flag. Where provider-shaped payloads have reached your domain models, the normalisation layer is the work, and that cost is incurred once regardless of which provider you add. We deliver raw NMEA, REST and WebSocket, so you can select the shape closest to what your pipeline already ingests.

How do we compare coverage between two AIS data providers fairly?

Fix the water and the window first, then compare the same vessels over the same period. The measures that hold up are update frequency per vessel, gap length distribution, and the count of distinct vessels appearing in the box, rather than a single global figure. Ingest both feeds into one store with a source column and reconcile them. Send us your bounding boxes and we will state what the network returns in them before you build the harness.

Can we redistribute the data inside our own product?

Put this to every provider before you write code. Redistribution, sublicence and display rights are where maritime integrations most often stall at legal review. Tell us who your end customers are, what they would see, and whether the product is white-labelled, and we will confirm in writing what we can support. That conversation belongs at the scoping stage, not after a roadmap depends on the answer.

What does independent actually mean here?

For us it means the physical layer. We own and operate the network, every station runs the same dedicated standardised hardware, and nothing in the feed is purchased from or blended with another network. It matters most when you are buying resilience. Two feeds tracing back to shared infrastructure fail together, and a second source qualifies as one only when it can fail separately.

The full picture for software platforms.

This page is written for teams comparing providers. Once that stage is complete, the detail on endpoints, delivery, second-source architecture and metering sits on our AIS data API page for software and platforms, which sets out what the integration involves in practice.

AIS data API for software platforms

Put us on the shortlist and test us in parallel.

Send the waters you cover and the delivery you require, and compare what an independent network returns on the same vessels.

Test the feed in your stack