Home/Alternatives/Offshore energy
The alternative to Kpler for Offshore Energy
Most offshore teams begin a maritime data search with the best known name, then widen the field. This page sets out what Worldwide AIS Network is, and what any AIS supplier should be asked before a contract is awarded.
100,000+
Vessels tracked / day
49M+
AIS positions / day
40+
Countries covered
<5s
Antenna to your API
Who we are, and where the positions actually come from
We own and operate the physical receiving infrastructure, so the feed is neither bought in nor blended from third parties.

Independence rests on infrastructure we ownWorldwide AIS Network is a Danish company in Copenhagen, CVR 45911748, backed by Den Danske Maritime Fond, approved under the Startup Denmark scheme and building with peaq. Independence carries a narrow, verifiable meaning here: terrestrial and ship-borne receivers we own and operate, plus satellite feeds.
Falsified positions surface as physical inconsistencyEvery station runs the same dedicated standardised hardware. Each message is encrypted on that hardware at the moment of capture, nanosecond time-stamped, and assigned a trust score by anomaly detection models. GNSS interference and position falsification are now routine conditions in the Baltic and the North Sea.
Delivery is deliberately conventionalRaw NMEA over TCP, a REST API, a WebSocket stream, and SAPIENT compliant output to the BSI Flex 335 interface, the SAPIENT architecture being owned by the UK MOD. Antenna to your API runs under 5 seconds. Where a platform is already in service, this sits beneath it as a source.
Evaluate us over your own watersSend a polygon, cable corridor or block reference, and we will report what our network collects over it, gaps included.
Check coverage over your assetWhat to look for in an AIS data provider for offshore energy
These are the six checks we would apply from your side of the table. They apply to every supplier on the shortlist, including us, and each should be answered without hedging.

1. Provenance: every position should trace back to a receiver
Establish whether each position carries the station that observed it, and whether that record survives into export. Consenting evidence and cable damage claims are both contested downstream, and a track that cannot be attributed to a source is a track a reviewer or a defendant can challenge. Request the field in a sample file rather than in a slide.
2. Latency: the figure depends on where the clock starts
Establish whether the quoted number is antenna to API or platform ingest to screen, and what it reads at the ninety-fifth percentile rather than the median. For a guard vessel hail over an export cable, the difference between seconds and minutes decides whether the event becomes an intervention or a report.
3. Delivery formats must fit the systems already in service
Offshore control rooms rarely need another dashboard. Confirm that raw NMEA over TCP ingests into an existing VTS or C2 stack, that a REST API covers historical extracts, and that a persistent stream carries live geofence events. Where the work touches sensor fusion or counter-UAS, ask specifically about SAPIENT compliant output to BSI Flex 335.
4. Coverage over your waters, not global averages
Global vessel and message counts, ours included, say little about a single lease area or block. Request a coverage report over the exact polygon and date range, ask how terrestrial and ship-borne reception combines with satellite feeds across it, and ask where the gaps sit. A supplier unwilling to name its gaps will leave you to find them later.
5. Independence determines who you actually depend on
Establish whether the provider operates its own network or resells and blends feeds from others. Neither model is inherently wrong, but the answer determines your data rights and whether a coverage problem can be remedied by the company you are paying. Obtain it in writing during procurement rather than during an incident.
6. Spoofing and manipulation require a stated treatment
Given the jamming and falsification now reported across northern European waters, establish what happens to a suspicious position: whether it is dropped, flagged or scored, whether the reasoning is visible, and whether the threshold is yours to set. AIS gaps warrant the same question, since a vessel going dark near a pipeline is itself an event worth capturing.
AIS data for offshore energy: the full sector page covers consenting and NRA baselines, cable corridor monitoring, 500m safety zone alerting and incident forensics in detail.
How the data is produced for offshore energy work
Three stages, each of them auditable. Nothing is modelled or bought in, so anything shown over your asset traces back to the receiver that collected it.
Collect
Our own network, one hardware standard
100,000+ vessels a day across 40+ countries, from terrestrial and ship-borne receivers, plus satellite feeds for open ocean we own and run, all using the same dedicated standardised hardware. Around an array, a block or a cable corridor, that means one consistent collection method rather than a patchwork.
Verify
Encrypted at capture, then scored
Each message is encrypted on the hardware at the moment of capture and nanosecond time-stamped, then scored by anomaly detection models. Falsified positions fail on physics, which is what you want when the asset is the target.
Deliver
Into whatever you already run
Raw NMEA over TCP, REST API, WebSocket stream, or SAPIENT compliant output to BSI Flex 335 for sensor fusion and counter-UAS. Under 5 seconds from antenna to your API, feeding your marine coordination centre, your existing platform, or both at once.
How Worldwide AIS Network compares.
The questions worth putting to every provider on your shortlist, including us.
| What to check | What to ask any provider | Worldwide AIS Network |
|---|---|---|
| Where the data comes from | Do you operate the receivers yourselves, or buy and blend feeds from others? | Our own independent physical infrastructure. Terrestrial and ship-borne, plus satellite feeds. |
| Provenance on each position | Can you tell me which receiver collected this specific position, and when? | Every position carries its originating receiver and a nanosecond time stamp. |
| Handling of spoofing | How do you detect a manipulated or spoofed position before it reaches me? | Anomaly detection models assess the validity of every position in real time. |
| Latency | What is the delay from reception to the data being available in my system? | Under five seconds, antenna to API. |
| Delivery formats | Which formats do you deliver, and will they drop into what I already run? | Raw NMEA over TCP, REST API, WebSocket stream, and SAPIENT compliant output to BSI Flex 335. |
| Coverage where it matters to you | Can you show me real data for my specific waters before I commit? | 100,000+ vessels a day across 40+ countries. Ask for a sample of your own area. |
| Running alongside what you have | Can I add you next to my current provider rather than replacing it? | Yes. Running side by side is the intended pattern, not a compromise. |
We have deliberately not filled in a column for any other provider. Coverage, latency and sourcing change, and a claim we cannot evidence is worth nothing to you. Put these questions to everyone you are evaluating and compare the answers yourself.
Questions we get from teams comparing providers
Can we run Worldwide AIS alongside our existing provider?
Yes, and that is the expected pattern. Most offshore teams approach us for a second, independent source over a specific asset, so that two records can be reconciled rather than one replaced. Parallel running is also the fairest basis for evaluation: place our feed alongside the incumbent over the same polygon and the same weeks, then judge coverage, latency and provenance on your own data rather than on our description of it.
How much integration work does adding a second AIS source involve?
It depends on where the feed lands. Where the control room already accepts raw NMEA over TCP, a second source is a connection detail and existing display logic is unchanged. Where an analysis needs positions as a file rather than a stream, that is a REST call. Live geofence events over a cable corridor use the WebSocket stream. The substantive work is never the transport, it is the arbitration rule when two sources disagree, and that is best settled with your engineers before contract.
We are mid-contract elsewhere. Is it worth talking now?
Usually yes, because the substantive part of the conversation is the coverage check, and that requires no change on your side. What an independent AIS data provider can see over your lease area, and where the gaps sit, is better established before a renewal than after it. We will not press you to break an agreement, and we would rather you reached renewal with comparative evidence than with a sales pitch.
Do you cover our specific lease area, block or cable corridor?
Not answerable in the abstract. Satellite feeds provide revisit over open water and terrestrial reception provides refresh rate nearer the coast, and most offshore assets sit between the two, so the only defensible answer is a coverage check over your exact polygon. Submit it and you receive a plain account of what our network collects there, gaps included, plus a sample carrying the originating receiver and trust score on every position.
What do you actually do differently?
We can only speak for ourselves. We own the physical receiving infrastructure rather than buying or blending a feed. Every station runs the same standardised hardware, encrypting each message at the point of capture. Every position is nanosecond time-stamped and carries a trust score from anomaly detection models, and the originating station remains attached through to export. Delivery is raw NMEA, REST, WebSocket or SAPIENT compliant output to BSI Flex 335, under 5 seconds from antenna to API. Whether that combination matters depends on the use case, and the coverage check will establish it faster than we can.
Comparing for another sector?
Put us on the shortlist, then test us over your asset
Send the polygon. Coverage and provenance come first, comparable against anything else under evaluation, before any commercial conversation begins.
Check coverage over your asset


