Skip to content

Home/Alternatives/Pole Star Global

The alternative to Pole Star Global

This page is written for a supplier evaluation already in progress, not for a pitch. Worldwide AIS Network is an independent AIS data provider that builds and operates its own network, so every position we deliver arrives with a record of its origin and a trust score attached.

100,000+

Vessels tracked / day

49M+

AIS positions / day

40+

Countries covered

<5s

Antenna to your API

What we are, and how the feed is built

A screening finding is only as strong as the positions supporting it. Ours arrive with their originating receiver, time and trust score.

  • We supply the data, not the applicationWorldwide AIS Network ApS is registered in Copenhagen under CVR 45911748, backed by Den Danske Maritime Fond and Startup Denmark, and building with peaq. That determines who we suit: teams with a screening workflow or risk model already established, seeking a source beneath it that can be accounted for line by line.

  • Nothing in the feed is bought inIt originates on our own independent physical infrastructure: terrestrial and ship-borne receivers, with satellite feeds for open ocean. Nothing is purchased or blended in from a third party feed, so every position is attributable to the equipment that collected it. 100,000+ vessels and 49M+ AIS positions a day across 40+ countries.

  • Every message carries its own recordEach is encrypted on the hardware at the point of capture, nanosecond time-stamped, then assessed by anomaly detection models that attach a trust score. Delivery is under 5 seconds from antenna to your API, over raw NMEA on TCP, REST, WebSocket, or SAPIENT compliant output to BSI Flex 335.

Evaluate us on your own data, not oursNominate an area of interest, a time window and vessels you know well, and we will return what our receivers collected there, with trust scores attached.

Request a verified data sample

What to look for in an AIS data provider

Six questions worth putting to every supplier on your list, ourselves included. They remain useful if you select another provider.

  • Whether the evidence withstands examination after the alert

    Any provider can raise a flag. The harder test is what corroborates it once the finding is challenged. Ask what accompanies a position on arrival: the receiver that collected it, the time to what precision, and whether the record could have been altered between capture and delivery. If a screening decision may be revisited months later by an auditor or a court, determine now what could be placed in front of them.

  • Where the data originates

    Some suppliers operate their own network, some license and aggregate feeds from others, and most sit between the two. Both models are legitimate. Aggregation acquires breadth quickly; owning the equipment establishes a chain of custody. Neither should be assumed. Ask each supplier which parts of the feed are their own and which are licensed in, then determine whether your requirement is for reach or for provenance.

  • How spoofing and interference are handled

    Manipulated AIS is routine in several regions, so the material question is not whether a supplier encounters it but what follows. Suspect positions may be flagged and passed through, smoothed into a plausible track, or discarded before delivery. For sanctions and compliance work, flagged is normally preferable, because the anomaly is frequently the finding itself. Confirm what the detection rests on and whether the reasoning is visible to your analysts.

  • Coverage in the specific waters you operate in

    Worldwide figures establish very little about one box on a chart. Identify the areas that carry your risk, select a window covering both a busy and a quiet period, and request what was collected there rather than a coverage map. Compare message counts, update rates and gap behaviour for the vessel classes you follow. Every network is stronger in some regions than others, ours included, and a supplier who states so is easier to plan around.

  • Latency, and the two points it is measured between

    A latency figure means nothing without its endpoints. Antenna to API, ingest to database and screen refresh interval are three separate measurements, and suppliers do not always quote the same one. Require each to define theirs, then establish what your process genuinely needs. Periodic screening and live monitoring carry very different tolerances, and procuring headroom you will never use is a straightforward way to overspend.

  • Delivery formats, and where the data terminates

    Determine early whether you are procuring a platform to work inside or a feed to build on. If the data must reach your own case management, screening engine or fusion environment, you need formats your stack already ingests, such as raw NMEA over TCP, REST, WebSocket or a defined interface standard. If the analysis occurs in the supplier's application, integration effort falls, and so does your control over where the data resides and how readily you could migrate.

How we produce the data

Our own answers to the criteria above, following the data in the order it moves.

Monitor

Collected on equipment we own

Terrestrial and ship-borne receivers, plus satellite feeds for open ocean, with the same dedicated standardised hardware at every station. 100,000+ vessels and 49M+ positions a day across 40+ countries, collected on our own independent physical infrastructure rather than bought in or blended from a third party feed. That is what allows a second source to be genuinely independent.

Verify

Encrypted at capture, scored on arrival

Every message is encrypted on the hardware the instant it is captured, then nanosecond time-stamped. Anomaly detection models apply a range of validity checks and attach a trust score, so a track that behaves impossibly reaches you marked rather than averaged into something tidier.

Act

Delivered into what you already run

Raw NMEA over TCP, a REST API, a WebSocket stream, or SAPIENT compliant output to the BSI Flex 335 interface for counter-UAS and sensor fusion, under 5 seconds from antenna to your API. It feeds the screening and monitoring tools you have chosen, and asks you to replace none of them.

How Worldwide AIS Network compares.

The questions worth putting to every provider on your shortlist, including us.

What to checkWhat to ask any providerWorldwide AIS Network
Where the data comes fromDo you operate the receivers yourselves, or buy and blend feeds from others?Our own independent physical infrastructure. Terrestrial and ship-borne, plus satellite feeds.
Provenance on each positionCan you tell me which receiver collected this specific position, and when?Every position carries its originating receiver and a nanosecond time stamp.
Handling of spoofingHow do you detect a manipulated or spoofed position before it reaches me?Anomaly detection models assess the validity of every position in real time.
LatencyWhat is the delay from reception to the data being available in my system?Under five seconds, antenna to API.
Delivery formatsWhich formats do you deliver, and will they drop into what I already run?Raw NMEA over TCP, REST API, WebSocket stream, and SAPIENT compliant output to BSI Flex 335.
Coverage where it matters to youCan you show me real data for my specific waters before I commit?100,000+ vessels a day across 40+ countries. Ask for a sample of your own area.
Running alongside what you haveCan I add you next to my current provider rather than replacing it?Yes. Running side by side is the intended pattern, not a compromise.

We have deliberately not filled in a column for any other provider. Coverage, latency and sourcing change, and a claim we cannot evidence is worth nothing to you. Put these questions to everyone you are evaluating and compare the answers yourself.

Questions buyers ask when comparing providers

Can we run Worldwide AIS Network alongside Pole Star Global?

Yes, and that is the expected arrangement rather than a fallback. We supply a feed, not an application, so we sit beneath what you already run instead of competing with it for screen space. Most teams begin by routing the cases that must be defensible through an independent source, leave everything else unchanged, and reassess the balance later. Nothing in our delivery requires a supplier to be removed before our value can be established.

How much work is it to switch, or to add us as a second source?

That depends almost entirely on the delivery route selected. If your systems already consume AIS as raw NMEA over TCP, adding us amounts to pointing an existing ingest at a new endpoint. REST and WebSocket are routine integrations for a development team. SAPIENT compliant output to BSI Flex 335 exists for environments already working to that standard. The substantive work is rarely the connection. It is determining where a trust score should alter your process, and that merits scoping internally before anything is agreed.

What about coverage in the specific waters we care about?

We will demonstrate it rather than describe it. The network covers 40+ countries and continues to grow, but no AIS network is uniform, and ours is stronger in some regions than in others. Provide the area and the window and we will return what our receivers collected there, before any commercial discussion. If that does not meet your requirement, we are not yet the right supplier for that region, and you should establish this before contracting rather than in month three.

What formats do you deliver, and can we keep the data in our own environment?

Four routes: raw NMEA over TCP, a REST API, a WebSocket stream, and SAPIENT compliant output to the BSI Flex 335 interface, the SAPIENT architecture being owned by the UK MOD, for counter-UAS work and wider sensor fusion. All four are machine to machine, so the data terminates wherever you determine, whether that is your screening engine, your case management system, your warehouse or your own picture. Positions carry their receiver of origin, a nanosecond time stamp and a trust score, and those attributes travel with the record rather than residing only in our interface.

Why would we look at an independent AIS data provider at all?

Two reasons predominate. The first is corroboration: where a screening result carries real consequences, a second source that shares no infrastructure with the first is worth holding, and independence is meaningful only when the receivers are genuinely separate. The second is provenance: some teams must evidence not only that a vessel was in a position, but how that is known. Worldwide AIS Network was built for both. Whether either justifies a change is your judgement, and it should follow a sample of your own waters rather than a sales conversation.

Already know what you need? Start with your sector

This page addresses buyers comparing Pole Star Global competitors and other suppliers in the abstract. Past that stage, the sector pages carry the operational detail: the specific workflows, the questions put to the data, and how the feed sits within what you already run.

  • Defence and government

    Maritime domain awareness, dark vessel detection and evidence that holds up after an incident.

  • Coastguard and SAR

    Last known positions, search planning and reconstruction of what happened before a call came in.

  • Sanctions and compliance

    Screening, ship to ship transfer detection and the provenance behind a positive result.

  • Marine insurance

    Warranty breach, war risk exposure and verified positions for claims and underwriting.

  • Commodity trading

    Cargo movement, port congestion and flow signals built on positions you can audit.

  • Banking and finance

    Trade finance checks, vessel counterparty risk and defensible records for correspondent banking.

  • Ports and terminals

    Arrival prediction, berth planning and approach monitoring at the update rates operations need.

  • Shipping and chartering

    Fleet visibility, voyage performance and laytime evidence from an independent source.

  • Offshore energy

    Asset protection, exclusion zone monitoring and traffic awareness around offshore infrastructure.

  • Subsea and survey

    Cable and pipeline route awareness, anchoring risk and vessel behaviour over critical seabed.

  • Towage and pilotage

    Job planning, low latency approach data and accurate timings for dispatch and billing.

  • Software and platforms

    A raw AIS data provider to build on, with formats and trust scores your product can expose.

Put an independent source on your shortlist

Send an area of interest and your integration constraints, and we will return what our receivers collected there. Compare it against everything else under evaluation, and decide on the data.

Request a verified data sample